You will want a bow/stern tie-down for each kayak so the Yakima Bow/Stern Tie-Down Ropes w/ Ratchets and Strap Loops # Y04031 will cover the other two kayaks. You may also want the # Y07416 to go with them.
I reached out to Yakima about the additional cinch straps and they said it all depends on the size of the kayaks. They said if they're too wide additional straps # Y05006 are necessary and said it would be best to get the straps just in case since you will regularly carry three. They... view full answer...
Hi Brian,
I reached out to the manufacturer, Bulldog Winches, and they told me the Bulldog Winch Ratcheting Wheel Tie-Down Strap # BDW20362 will work with "11 inch or wider" tires. view full answer...
Hey Dwayne that is a great question. Generally, we would want the tie down points to be in line with the front and rear of the tire. So the # EM58522 straps would hang straight down and connect to the # RR05 D-ring. You can also angle them forward if needed. It really depends on the trailer, the tire and how much space you have to work with.
There really is no rule of thumb for how far away the tie down point can be, so if you have to go a foot away from the tire you definitely can. I... view full answer...
Hey Albert; I suppose you can technically use the Cable Lock # 8428DPS as a way to tie down gear, but I wouldn't recommend it and it doesn't have any type of load rating as it's not meant for that specific application.
To be on the safe side I would definitely stick with cam straps like the 8-3/16' long Rhino-Rack Cam Buckle Cinch Straps # RRRTD25L or 11-1/2' Long # RRRTD35L. view full answer...
I took a look at some photos of the crossbars on your 2019 Toyota 4Runner, and you weren't kidding when you said there wasn't much clearance. Thankfully, there is exactly one J-style kayak carrier that lack of clearance won't be a problem for, and that's called the Kuat V2, is available in either black or gray:
- Black: Kuat Class 4 V2 Kayak Roof Rack w/ Tie-Downs # KU53VR
- Gray: Kuat Class 4 V2 Kayak Roof Rack w/ Tie-Downs # KU33VR
The reason this will work with such limited clearance... view full answer...
Yes, you can place the etrailer Horizontal E-Track # e25VR across your trailer from side to side. This will allow you to use the CargoSmart Motorcycle Wheel Chock # 3481731 making it easier and safer to secure your bikes in your trailer. Be sure to use the etrailer E-Track Backing Plates w/ Hardware # e46RR to secure each of the 5' tracks in place. Each of these kits includes 3 brackets for each track.
I recommend using the Erickson E-Track Tie Down Rings # 59131 and Cam Tie-Downs # EM05729... view full answer...
Because the TracRac ladder rack crossbars are so large there are no kayak carriers that will fit them. You would have to rest the kayaks on the bars and use load stops such as # TA44700 to help hold them up. Then you would use some straps such as # RTD3 to secure them to the bars. And you would tie off the bows and sterns using a tie down set such as # Y04031. view full answer...
A CargoBuckle strap like the # IMF18816 you got is only available with the ladder rack mounting bracket. They don't offer it separately or as a replacement without the bracket. If you want more of the same without the bracket the only option would be to get another set of the # IMF18816 and pull the bracket off.
If you don't mind a different hook style the CargoBuckle G3 Retractable Ratchet Tie-Down Straps # IMF18800 don't come with a bracket they just bolt on. The straps are 2" x 6'... view full answer...
While there aren't any cargo carriers that would fit two mobility scooters or even be able to handle the weight of two, you do still have the option of using a trailer like the Detail K2 Mighty Multi Utility Trailer # K2MMT4X6. The loading gate isn't the best for a mobility scooter so I recommend getting some loading ramps # 288-07474-2 as well. You can use some tie-down straps like # EM04418 to secure your scooters to the trailer. view full answer...
The biggest difference between the TorkLift Camper Tie-Downs # TL84FR, # TL44FR & the TorkLift Talon Camper Tie-Downs # TL73QR & # TL44XR is that the Talon's are made of Aluminum which is going to be approximately 30-50% lighter than the traditional steel tie downs.
Other than that, they are the exact same and will do the same job. The other caveat is the aluminum Talon tie downs are also going to quite a bit more expensive.
With either choice you are also going to need a set of turnbuckles... view full answer...
Since you have running boards that run all the way to the rear, the only cusotm tie downs available for your 2021 GMC Sierra 1500 are for the rear using the TorkLift Camper Tie-Downs - Custom Frame Mount # TL54FR.
To properly install your pop up camper in your truck you're going to need all 4 tie downs, so the only way you'd be able to do that is if you used # HSSF which is an in bed tie down. view full answer...
The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following:
With a factory installed hitch or non-Torklift aftermarket hitch
-TorkLift Talon Camper Tie-Downs # TL52XR (front) and # TL34FR (rear)
or
-TorkLift Camper Tie-Downs # TLD2141 (front) and # TLD3112 (rear)
With a TorkLift SuperHitch Magnum 30K
-TorkLift Camper Tie-Downs # TLD2141 (front) and # TLR3510 (rear)
Keep in mind, none of these will fit if you have the aftermarket... view full answer...
Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for.
For the front, you'll want the TorkLift Camper Tie-Downs # TL87CR (TorkLift P/N F2032), and for the rear you'll want the TorkLift Camper Tie-Downs # TLF3008 (TorkLift P/N F3008).
In addition to the tie downs, you're also going to need a set of turnbuckles # TLS9529-2-LK to secure your camper to the vehicle. view full answer...
Hello Jerry, I am sorry to say that we do not offer any custom fitted camper tie downs for a 2024 Nissan Titan XD. We carry both the Torklift and Happijack brand tie downs and neither of these manufacturers make anything for this vehicle. It may be possible to use some universal no-drill bed-mounted tie downs like the Brophy # HSSF, but we have not tested for fitment so we cannot confirm that they will work. I have linked the review video and installation instructions below if you want... view full answer...
The correct camper tie-downs for your 2023 F-350 DRW are the TorkLift Camper Tie-Downs - Front # TL87CR and TorkLift Camper Tie-Downs - Rear # TLF3008 view full answer...
Hey Kenneth, thanks for the question and the answer is yes, TorkLift tie-downs are specific not only to the year make and model, such as the 2014 Ford F-350, but also specific to the length of your bed, if you have running boards, and the hitch you have. For example, on a 2014 Ford F-350 with a 6-3/4' bed, no running boards under the bed, and a factory hitch you would use the TorkLift Camper Tie-Downs - Front # TLF2012 and Rear # TLF3006.
Or for a '14 F-350 with an 8' bed, no running... view full answer...
That's a great question Mike and I have an interesting answer. There actually isn't any specific weight capacity for the HappiJac Truck-Mounted Camper Tie-Downs item # LC182910-182971.
These are designed to handle the weight of any truck bed camper, and that's true of any camper tie-down, which is why there isn't a designated weight rating. If a camper can fit inside the bed of your F-350, the HappiJac tie-downs will safely hold it in place.
The only other thing you will need with these... view full answer...
Because you are using the TorkLift Front # TLD2140 and Rear # TLD3113 frame mounted Tie-Downs you are going to want to use their Turnbuckles # TLS9529-2-LK. This is due to the length of them as the Happy Jack # LC182898 have shorter turnbuckles due to them using a bed mounted front anchor. The TorkLift Turnbuckles # TLS9529-2-LK come with locks as well to protect your investment. view full answer...
Hey Brian, so according to TorkLift they don't have any tie downs for the front but for the rear you are going to want the TorkLift Camper Tie-Downs # TL54FR.
Since your truck has factory running boards that extend under the bed, there aren't going to be any front tie downs available. view full answer...
Go To Results